Fusetron™ FRN-R Class RK5 250Vac/125Vdc 1⁄10-60A, dual element, time-delay fuses

Catalog symbols:

• FRN-R-_ (non-indicating)

• FRN-R-_ID (indicating)

Description:

Eaton Bussmann® series advanced protection, energy efficient FRN-R Class RK5 dual element, current-limiting, time-delay fuses with optional open fuse indication on select ratings. Time-delay-10 seconds (minimum) at 500% of rated current (8 seconds for 1⁄10-30A sizes).

Specifications:

Ratings:

Volts:

• 250Vac

• 125Vdc

Amps:1/10-60A

Interrupting rating:

• 200kA Vac RMS Sym.

• 20kA Vdc

Agency information

• UL Listed, Std. 248-12, Class RK-5, Guide JDDZ, File E4273

• CSA Certified, C22.2 No. 248.12, Class 1422- 02, File 53787

• CE

Catalog numbers (amps) - non-indictaing fuses

* Open fuse indication available by inserting the sufix “ID." E.g., FRN-R-15ID.

Carton Quantity:

Features:

• Provides motor overload, ground fault and short-circuit protection

• Helps protect motors against burnout from overloads

• Helps protect motors against burnout from single-phasing on three-phase systems

• Simplifies and improves blackout prevention (selective coordination)

• Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance

            short-circuit and overload protection

• The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater

            than the ampere rating of the fuse for a minimum of ten seconds

Recommended fuse blocks:

For additional information see data sheet no. 10289.

Fuse reducers for Class R fuses

For additional information on Class R fuse reducers, see data sheet no 1118.

Fusetron™ FRN-R Class RK5 250Vac, 125/250Vdc 70-600A, dual element, time-delay fuses

Catalog symbols:FRN-R-_

Description:

Eaton Bussmann® series advanced protection, energy efficient FRN-R Class RK5 dual element, current-limiting, time-delay fuses. Time-delay - 10 seconds (minimum) at 500% of rated current.

Specifications:

Ratings:

Volts:

• 250Vac

• 125Vdc (110-200A)

• 250Vdc (225-600A)

Amps:70-600A

Interrupting rating

• 200kA Vac RMS Sym.

• 20kA Vdc

Agency information

• UL Listed, Std. 248-12, Class RK5, Guide JDDZ, File E4273

• CSA Certified, C22.2 No. 248.12, Class 1422-02, File 53787

• CE

Catalog numbers (amps):

Carton Quantity:

Features:

• Provides motor overload, ground fault and short-circuit protection

• Helps protect motors against burnout from overloads and single-phasing when sized properly

• Simplifies and improves blackout prevention (selective coordination)

• Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance

            short-circuit and overload protection

• The overload element provides protection against low level overcurrent of overloads and will hold on inrush current which is five times

            greater than the amp rating of the fuse for a minimum of ten seconds

Recommended fuse blocks:

For additional information on the RM 250 volt fuse blocks, see product brochure no. 3192

use reducers for Class R fuses

* These reducers are not CSA Certified.

†Single reducer only (pair not required)

For additional information on Class R fuse reducers, see data sheet no 1118.

Current-limiting effects: